Bearing Buddy Trailer Bearings Races Seals Caps – Caps – BB2441SS Review – etrailer.com
Bearing Buddy Trailer Bearings Races Seals Caps – Caps – BB2441SS Review – etrailer.com


Today, were going to review part number BB2441SS. These are the Bearing Buddy Bearing Protectors
in a stainless steel construction. These Bearing Buddies are great for marine
applications. The stainless construction will provide the
best in corrosion resistance and the design of the Bearing Buddy makes an easy way to
protect your bearings by keeping the water out, ensuring enough grease is in the hub. Basically, these Bearing Buddies will replace
the grease cap on your actual hub. Remove the dust cap or grease cap and this
would insert in place of that. This will prevent wheel bearing failure by
keeping water and dirt out of your hubs and bearings and then it allows the boat trailer
wheels to be completely submerged and it stops corrosion and pitting on the bearings. It does provide an easily accessible grease
fitting which makes adding grease to the bearings quick and simple. Inside, it will maintain slight controlled
pressure about 3 psi with the spring-loaded piston which will prevent water from entering
your hub. It will prevent overfilling and rear seal
damage with an automatic pressure release feature. In other words, if you get too much grease
in there and overfill it, it will release grease on the outside of this, seal on the
inside, our piston, and the grease will just stay on your outer barrel here.

Leave a Reply

Your email address will not be published. Required fields are marked *