Cleaning Head Module Replacement for iRobot® Roomba® 980 Vacuuming Robot
Cleaning Head Module Replacement for iRobot® Roomba® 980 Vacuuming Robot


To replace Roomba’s cleaning  
head module, remove the bin. Now turn the robot over and unscrew the side brush screw with a screwdriver or coin  
and remove the side brush. Now unscrew the two screws  
on the battery door and remove the battery door  
and the battery. Unscrew the two screws  
that hold the bottom cover and then remove the bottom cover. Now unscrew the four screws that hold  
Roomba’s cleaning head module and remove the module. Install Roomba’s new cleaning head. Then replace Roomba’s bottom cover and reinstall the battery  
and battery door. Replace Roomba’s side brush, then turn the robot over  
and replace the bin.

2 thoughts on “Cleaning Head Module Replacement for iRobot® Roomba® 980 Vacuuming Robot”

  1. Dolefin Nelson says:

    I like roombas they are cool

  2. Juliana Fernandes Larrosa says:

    In which situations the cleaning head must be replaced? My roomba 980 is making a loud noise and I suspect that is because the cleaning head is hitting the floor.

Leave a Reply

Your email address will not be published. Required fields are marked *