Dishwasher Repair- Replacing the Dishrack w/ Middle Wash Arm and Tube (Whirlpool Part # W10253040)
Dishwasher Repair- Replacing the Dishrack w/ Middle Wash Arm and Tube (Whirlpool Part # W10253040)


Hi, it’s Steve from PartSelect. Today we’re
going to show you how to change the upper rack assembly on your dishwasher. Really easy
job, no tools required. Let me show you how we do it. Now to perform this repair we need to pull
the rack stops off of the end of each of the rails. Simply depress the locking tab, push
the rack stop straight up and out, and set those aside. And simply a matter of pulling the old rack
completely off of the tracks, and we can discard it. To install the new rack, pull the tracks back
out, engage one of the rear wheels on one side, line up the other side, make sure all
four wheels are firmly in the track. We’ll pull the tracks ahead just far enough
so that we can reinstall the rack stops. Make sure the locking tab holds it in place. And
our repair is complete. We told you it was an easy job. Thanks for
watching, and good luck with your repair.

Leave a Reply

Your email address will not be published. Required fields are marked *