How To Clean The Dirtiest Wheels! – Chemical Guys
How To Clean The Dirtiest Wheels! – Chemical Guys


Welcome back to the Detail Garage! So a common question we get here is how do
you get rid of brake dust from chrome rims, painted rims and OEM rims. So over here we’ve got two vehicles that have
caked on brake dust, road grime and anything else you can throw at it and where going to
clean them both comparing two different brushes. We have the new Show Car Premium Detailing
Brush which is intended for heavy duty brake dust like you have on this Mitsubishi. We also have our New Easy Reach Wheel Brush
which is for your painted and delicate wheels like this Mustang. Now, this is a 2005 Mustang it is black and
you can see it has been through a lot. It looks like its been off-roading you can
see there is dirt and mud and sorts of stuff caked up on the wheel. So we are using our soft bristle brush it
has the same design the Show Car Brush but it is not as aggressive. It’s very soft so you can use it on your painted
rims or areas with sensitive paintwork. You can use it on grilles, exhaust tips and
anything you want to get that nasty filth off of a sensitive surface. Over here, I have a bucket set up with Diablo
Wheel Gel and this is going to help clean by emulsifying the brake dust and dirt while
adding lubrication as we wash. I’ve also placed a Dirt Trap in the bucket
to prevent more of the dirt from coming back on to the vehicle. So now as you can see just by rinsing it off
it has knocked off a lot of the loose dirt and debris but there is still some brake dust
and embedded contaminants that we’re going to get off using the Easy Reach Wheel Brushes. So using a lot of foam we’ll start at the
top and work our way around the wheel and this way we don’t bring any of the filth and
contamination on top of areas we already cleaned. What’s great about this brush is it reaches
all the way down the barrel of the rim this way we get as much of the contaminants off
because as you can see this wheel has large spoke openings and as you look at it you can
see all the way to the back of the wheel and it would look kinda funky if you could still
see brake dust and grime inside. So this brush has taken off all the filth
without scratching the surface because it is super soft and the bristles trap foam that
acts as lubrication. But it didn’t cover the entire face of the
wheel so now we’re going to move on to a more intricate brush. This is the Goat Boar’s Hair Brush and this
is for areas like the lug nuts or in here where it gets pretty tight with the spokes. Just get some foam on here and start working
it in. Now over here you might notice that I have
the DeCon, it looked like this rim was really contaminated but after rinsing it off and
some light scrubbing you can see the grime comes off fairly easily. The Mitsubishi on the other hand, that thing
looks really bad and I know it’s going to need DeCon and a lot of scrubbing so we’ll
save that for when we move to that car. As you can see the Boar’s Hair Brush got in
really nicely to the spokes, lug nuts, valve stem and calipers. The design of it takes off all the grime and
contaminants without scratching. Since it has this plastic design you don’t
have to worry if you bang it against the rim. As a last step I’m going to move on to the
face of the rim, using this Soft Green Flagged Tip Brush we’ll get it nice a foamy. We’ll just hit all the spokes one last time
to knock off anything that was sitting or left behind residue. As you can see it’s a night and day difference
from how it looked earlier. That brush took care of all the brake dust,
road grime and mud that slug all over the wheel. It looks really good but this was a cake walk,
it was pretty simple to clean but on the other hand this Mitsubishi is going to be a real
challenge. It has all this caked up brake dust and road
grime that has embedded the surface and you can actually feel it but we are going to try
our best to get all of that out of there. Now, when you leave brake dust on your rims,
it is corrosive so it starts to eat away at the finish creating pits as it embeds into
the surface. It’s not going to be a 100% correction but
it is going to look a lot better than it does right now. Look it’s clean. All done! So by rinsing off the rim this is helping
take off as much of the loose brake dust and filth as I can. It’s going to make it easier to clean and
it is going to prevent scratching. Over here, lets load up our bucket using some
Diablo Wheel Gel. Just add about an ounce. Diablo Wheel Gel is safe for any chrome, painted
and OEM wheels, it’s going to create this foaming action which is going to get deep
within the pores and it’s also going to prevent scratching due to all the lubrication it is
creating. Now that I have my bucket loaded up with a
mountain of foam and all my brushes are ready to go, I’m going to spray down the wheel using
DeCon. DeCon is an iron removing wheel cleaner, it
creates a reaction that helps emulsify and pulls it out of the rim. I’ll spray a generous amount on the rim because
as you can see it has a lot of brake duct and contamination on there and we really need
to cut through there to get to the bare surface. I’m going to let this sit for a couple minutes
and in the meantime I’m going to load up my brushes with foam. The foam is going to help add some lubrication
which prevents scratching but it also makes it easier to clean because the foaming action
is getting all that brake dust emulsified and helps pull it off. As I mentioned earlier this is our new Show
Car Premium Detailing Brush, it’s the more aggressive version of the brush that we used
on the Mustang. This one is going to help cut through all
this brake dust and get down to the deep embedded junk to get this rim looking right. The DeCon is doing its thing, it’s reacting
with the iron causing that purple color making it easy to clean and reveal that high shine. Just like I did with the other rim I’m going
to start at the highest point and work my way around so that I don’t get that dirt on
areas that I’ve already cleaned. This is gross. Just like on the Mustang the last step I want
to do is clean the face of the wheel. I’ll be using the Green Soft Flagged Tip Brush,
this is a soft brush that collects a lot of foam and isn’t going to scratch the surface
but it is going to pull off any last residue. Alright guys both cars are finally done. Starting with the Mustang we were using the
Easy Reach Wheel Brush, this is a soft bristle brush that got in between the spokes took care of any road grime and brake dust without scratching. To help me clean I was using Diablo Wheel
Gel which creates a lot of foam that lubricates so we don’t scratch. Then to get in the smaller areas I used the
Boar’s Hair Brush to clean the caliper, the lug nuts and around the valve stem. To get the face of the wheel I used the Green
Flagged Tip Brush that removes any type of surface debris without scratching. Moving over to the Mitsubishi, this car was
pretty challenging that’s why we used our Show Car Premium Detailing Brush. It’s a more aggressive bristle brush that
can get in between the spokes to pull off the contamination and grime that’s stuck in
there without actually scratching the surface. To help me clean I used DeCon which is an
iron remover as you saw this wheel was covered in brake dust, the DeCon cut through that
to help remove it. I also used the Boar’s Hair Brush to get in
the small areas like the lug nuts, valve stem and in these smaller more intricate areas. To clean the face of the rim I used the Green
Flagged Tip Brush which is a super soft bristle brush that took care of anything that was
sitting on the face of the wheel. It took care of any brake dust, road grime
and residue that was left behind. You guys probably notice that there is still
some small areas with a little bit of brake dust left behind that is because the wheel
is already starting to pit. Brake dust is very corrosive so it gets into
the surface and starts to deteriorating the finish. You can use a clay bar to get more of the
contamination out of there to make it look at least 80% better and then it is ready for
a polish. So if you guys want to learn more about these products, check it out on our website ChemicalGuys.com. If you like this video be sure to give it
a thumbs up and we’ll see you guys next time right here in the Detail Garage.

100 thoughts on “How To Clean The Dirtiest Wheels! – Chemical Guys”

  1. ChancesAreAmanda says:

    He is smart and adorable… hey! I'm single! Haha great video!

  2. Filippe Barros says:

    Lol "you can see that it's black, it's been through a lot", 22 jumpstreet throwback

  3. michael gibson says:

    I have have painted alloy rims. what's the beers way to clean and protect those so the look like new.

  4. Huron Auto Detailing says:

    Steam

  5. tristinreilly9604 says:

    It's called wheel not a rim. Wheels and tires, not rims and tires lol just saying

  6. Tony Hill says:

    Great job.
    I always end up splattered with muck off the wheels….you are spotlessly clean lol 😁

  7. SCUG says:

    Anyone know the songs in this video?

  8. F Jon says:

    Great information, I use most of your products and they makes a big difference how my car looks. It's time for a new order.

  9. Isaiah Hinojosa says:

    Brand of the wheels on mustang

  10. Agusto Rodriguez says:

    What can I use for my American force rims??

  11. Jeremiah Alexander says:

    In subbing cause I wanted to see a video of real dirty rims on a Montero which I have! If you could guys please find another Montero that needs a major inside detail please with light tan carpets. I want to see how your products work and how you would clean such vehicle! Thanks in advance!

  12. # Kinkel says:

    Use a high pressure cleaner 🙂

  13. Cj Maldonado says:

    Why not just take the wheel off to clean it entirely?

  14. lilJames881 says:

    I wonder how many people caught the "crowd control" comment. Savage!

  15. Racing is life says:

    Where's the 6th lug nut?

  16. Funko Chimp says:

    He talks so fast

  17. José Mercado Mendez says:

    6:48 I though it was a mosquito

  18. blueknight says:

    Just acquired a 19 year old gmc jimmy and I don't think the rims have ever been washed. Do a video of how easy it is to clean a rim like that with your products.

  19. corey15469 says:

    Is every wheel missing atleast one lug nut??

  20. therushden says:

    Came up treat 👍

  21. Julius Bond says:

    Wow! Night and day difference. Great job. I'll be buying products from you guys.

  22. bertOldo says:

    I would like to order ur product pls and the toll aswell

  23. DavidFPV says:

    Have you ever done an equipment cleaning video? or do you guys just toss away your brushes after one use? Thanks for the vids!

  24. jessejames! says:

    ya'll are over reacting about a missing lug nut? that ain't nothing. I've seen a piece of shit 98 dodge ram come through the shop with 2 lug nuts holding it on (one of them cross threaded), with 2 broken studs, and one 1 fucked up stud that you couldn't put a lug nut on. We told him he said nah don't worry about it. Seriously a missing lug nut on 5 lugs or more isn't gonna hurt anything, but I certainly won't be driving around with one of them missing and ignoring it. 2 or more, you need to give that vehicle attention.

  25. Mont says:

    Do you hays have something against valve caps? Neither vehicle had 1

  26. jeff wolf says:

    Here's an interesting question for you I have a BMW with 18 inch Atterra 6-spoke Wheels with air filler inside the center caps. All chrome wheels and after the first year I made the mistake of running them all winter because the winter was very warm and I don't think it even snowed. But by doing so I think the roads are salted in the salt got on my wheels and really made these big huge cancerous spots where the Chrome is just chipped away is there any way that I can salvage these wheels by redipping them or is there a spray paint type Chrome surface repair that I can put on them or something some other method?

  27. jesus figueroa says:

    no one else got the crowd control joke? :,(

  28. Nick Nicky says:

    In what order do you clean your car?

  29. How To Video Channel says:

    I love using the cans of foaming tire spray to clean off my rims. It is amazing how it eats through all of the grease and grime that stick to the rims. Usually, I give it a good spray before going through a car wash. It's the easiest and most mess-free way of cleaning the tires!

  30. Gabriel Hernandez says:

    Isn't this bad for the brake rotor and pads? When you clean it you push all the old brake dust back onto the rotor don't you?

  31. Dylan G says:

    This frickin video has been in my recommended for so long I finally caved in

  32. iXii000 says:

    LOL that 'brembo' calipers though

  33. ᴴᵃᶰˢ ᴮˡᵃᵃᵘʷ says:

    That mustang has got some ugly wheels man

  34. Nic D says:

    can we just appreciate that mustang had single piston base model calipers with a brembo sticker.. might be worse than those shitty caliper covers

  35. jamc666 says:

    wouldnt it be easier to remove the wheel to do the cleaning?

  36. Car detailing enthusiast says:

    I must not have had any brake dust on my wheels. When ever I used decon it never changed colors. I guess I need to go longer than a week before washing my car to see some color changing action. Lol

  37. Rene Mendoza says:

    "Crowd control"😆☠️💀Dead AF!!!!

  38. 351cleavland says:

    With the sudsing wheel cleaner, instead of making a huge bucket that will be thrown out after use, fill a spray bottle with the appropriate ratio of cleaner concentrate to water! Then fill a bucket with warm water and use that as the brush rinse bucket. You will not be wasting as much product and spraying on the wheel only what you will need.

  39. Samuel Logo says:

    Can you do chrome rims that has water stains and brake dust on it?

  40. Brady Moeller says:

    I didn’t see any reason to clean the mustang wheel

  41. Dakota says:

    Ugliest generation of the mustang made even uglier with those oversized wheels

  42. Stephen Anderson says:

    do you ship products directly to the UK?

  43. Robin Oster says:

    THOSE FAKE ASS BREMBOS

  44. Puglife Puglife says:

    Inhate it when people put big old chrome wheels on their car and never clean them

  45. Mike Bruns says:

    As many of these videos I've watched and products I've bought this is the first time ive noticed this guy sounds like Jeff Goldblum

  46. derek garcia says:

    Mustang has no lug nut

  47. Aiden says:

    "Looks like some kinda Crowd control "😂

  48. Deen’s Dynasty says:

    )

  49. Trippyboi666 says:

    So like no one else notice the stock brakes with the brembo sticker on them

  50. John Sheppard says:

    Do you empty bucket after each wheel?

  51. Fence24 Inn says:

    Where i can find that music in back ground

  52. The Gothic King says:

    nice video broski .

  53. Carl Nichols says:

    Those "brembos" tho , gota get me a set

  54. Neerav Reddy says:

    Why does the mustang have a brembo sticker on non brembo brakes🤨

  55. Cibele Jesus says:

    Before after

  56. Rob El cubano says:

    All that for one rim damn I’m must be a lazy ass dude but that’s a lot tho🤔🤔🤔

  57. VinceAlinceAble SRT says:

    “Crowd control”, ha! Moostangs

  58. Gabriel Cruz says:

    0:40 some kind of crowd control lmfao!

  59. Jaden339 says:

    XD he said crowd control

  60. M S says:

    Hey there! I have matte black wheels, tried your Diablo wheel gel and it did not remove the grease or grime towards the back of the rim. What do you recommend I try next? Diablo did clean the face of the rim and the tires very well.:)

  61. M S says:

    Would you guys still recommend using the Ferret wheel, rim and engine brush to clean matte wheels? As oppose to the newer wheel brushes you have out now?

  62. Paulo Esteves says:

    The Pajero is called Montero in the us? That's weird

  63. TheMichael408 says:

    How do I keep my brushes from building up break dust, like getting them dirty? I always buy brushes and they always end up with break dust build up.

  64. Naldo says:

    diablo and a goat, very devilish?

  65. Steven Universe says:

    I love chemical guy products 😀

  66. Jake44565 says:

    In regards to the Diablo Wheel Gel: can you mix it in a waterbottle to dilute it for an easy quick detail on the rims as well? and if so, how much of the wheel gel for how much water? Thanks!

  67. JCR says:

    Waste of money and time

  68. Scott Miyake says:

    the music is horrible

  69. Doc Holiday says:

    Money money money

  70. SDav21 says:

    How did those first rims get scratched on those inside spokes??? The spokes are inset so they can never come into contact with a curb??

  71. Sofian Tanger says:

    Get this foaming action goinngggg just leave de brush hanging out

  72. MrDanbeer says:

    Overall I like the video but that music has to go!!!

  73. Sam castello 101 says:

    All of that and it didn't even do that good of a job

  74. Jonathan Rosa says:

    Great video as always, if I just washed the car and after 3 or 4 days there's just some light dust what's the best stuff to use if I don't wanna fully detail Since it's not necessary at this point

  75. cersel says:

    What kind of water nozzle are you using?

  76. Slim Cognito says:

    That crowd control joke, love it

  77. Sandwhich Thugg says:

    Do you guys buy 2 separate buckets? 1 bucket for the wheels only & a separate bucket for washing the car only or can I use 1 bucket for everything.?

  78. MAX Acoon says:

    Dis channel makes cleaning fun😂

  79. LeeROBD says:

    Nice stock ford brembo you got there

  80. TWISTIES FORCLOWNZ says:

    Pajero means Wanker

  81. Ravindra Rajapure says:

    Hello sir
    i am from india i would like to use your product
    So where from i brought
    Pls contact

  82. Brandon Lozano says:

    Steps to clean a super dirty wheel
    1:Buy a flamethrower
    2:Burns the wheels
    3:Enjoy your new wheels

  83. suraj chamoli says:

    I have a question??

  84. Juice The Presa says:

    Awesome , give me a sub guys !😃

  85. al ex says:

    Is that a v6 mustang i see

  86. AgainstEmpyre says:

    Mustang & Crowd control name a better duo

  87. Cole says:

    Is it necessary for me to make a huge mess on the ground

  88. Sergio Inzunza says:

    "Crowd control", was there human hair on those wheels?

  89. Kevin Zari says:

    do you only work out of one bucket with this method?

  90. Tundra Whisperer says:

    Is the Decon 100% safe on painted wheels? Thx

  91. Moreno12 says:

    Sitting while doing heavy cleaning is horrible for your back.. just saying

  92. T Liberty says:

    Absolutely love the diablo wheel gel!

  93. Max Rockatanksy says:

    "Crowd Control": i see what you did there 😄

  94. Sawyer Clerkin says:

    It’s missing a lug nut lol

  95. uzis4life says:

    Need a video on how to repair chemical burn on rims please

  96. atticus puls says:

    Love those rims on the mustang anyone know what brand?

  97. KT Tangos says:

    Those rims already look beautiful, you should see the rims on my sons kia, i doubt they ever come clean! But his whole car looks like shit! Even spraying brake cleaner and a scrubby dont touch it!!! Im gona need a magical chemical 😐😐😐😐😐

  98. Jacob Selvey says:

    Any tips on getting the rims clean? I bought all the cleaning products in this video and the brushes and wasn't able to get my rims clean. I did every thing according to this video. Also my rim are as bad as the trucks rims. The previous owner wasn't really able to take care of the car

  99. Rick Clark says:

    Nice Job!

Leave a Reply

Your email address will not be published. Required fields are marked *