Remove the rear wheels. Use a hammer. Use a flat screwdriver. Remove the hub bearing protection cap. Use a drive socket No.30. Unscrew the wheel hub fastening nut. Remove the brake drum. Use a pliers. Take out brake pad retainer springs from the holes. Disconnect the parking brake cable. Use a pliers. Remove the brake shoe assembly kit. Install the assembly kit onto new brake shoes, repeating the procedure in reverse order. Connect the parking brake cable to the parking brake lever. Use a pliers. Install the brake shoes on the working brake cylinder on the bracket and on the brake-support plate bracket. Install the retaining springs on brake shoes. Use a pliers. Use a hydraulic press with mandrels. Use a circlip remover. Use a drive socket No.30. Screw the hub nut. Install a new hub bearing protection cap.