How to replace front wheel bearing NISSAN X-TRAIL T30 TUTORIAL | AUTODOC
How to replace front wheel bearing NISSAN X-TRAIL T30 TUTORIAL | AUTODOC


Use a socket №22 Use a socket №32 Use a socket №22 Use a special puller to take the tie rod end out Use a socket №12 Use an open-end wrench №22 Use a socket №19 and a combination spanner №17 Take out the wheel bearing snap ring Press out the wheel bearing using a hydraulic press

13 thoughts on “How to replace front wheel bearing NISSAN X-TRAIL T30 TUTORIAL | AUTODOC”

  1. Ryan Casey says:

    Give us a smile lad ๐Ÿ˜‚

  2. Quintal Yurts says:

    Oh, to be able to work on such clean cars, in the air and with power tools. Such luxury.! Lol. Nice video guys. ๐Ÿ‘

  3. Mohammed Azgar Ali Shah says:

    Tanq for the vedios… Can u make a vedio for gear vibration problem in Nissan xtrail T30 AT

  4. m4ray says:

    Thx for video, I buy now in Autodoc!!!

  5. Kgothatso Kopo says:

    Gud job

  6. Kgothatso Kopo says:

    Gud job

  7. Pierre says:

    Loved it.. I need to do this to my exy… Going to try to remove the hubs at home and I have a friend who can press in the bearing for me.

  8. Drey T Peters says:

    Question if anyone can help a brother out. the T31 bearing would be for the 2008 X-Trail? my back left is bad and wanna change it.
    however gonna have to order it maybe off ebay since i can find the part there.
    thanks in advance

  9. orange12v says:

    I very much like these videos but in this one he did not install the split pin right

  10. Steve Austin says:

    Thanks very much, it helped me to scope out a forthcoming job.

  11. chris lomas says:

    Top Video.I bought one on ebay for $50 Au and fitted it myself in 2 hours.Half the inner race stayed on the shaft & needed to grind it to release it & with no Press I used a Hammer to remove the old one then placed the new one in the Freezer for a hour & used a LPG burner to worm the case up then used the Vice to press it on.Worked well.Thank you for helping me not get ripped off by a Mechanic.

  12. Benjamin Watson says:

    What happened to the Disc ,

  13. Derek Bond says:

    Brilliant stuff, gives you all the mechanical information needed to do this replacement.

Leave a Reply

Your email address will not be published. Required fields are marked *