How to replace the drum bearings on your washing machine ?
How to replace the drum bearings on your washing machine ?


Unscrew and remove the side panel from the washing machine Remove the central screw from the bearing And the two screws on either side Using a screwdriver, remove the bearing-housing
assembly Along with the retainer and its gasket
And finally remove the seal ring On this model, you have to disassemble the
housing containing the bearing Along with the retainer and its gasket and
the seal ring Make sure you fit the seal the right way round And clip the retainer in the tabs Fit the new bearing assembly And screw it back on Use the tubular socket wrench for the central screw Repeat the same steps for the bearing on the pulley side
Remove the side panel Take off the washing machine drive belt Unscrew and remove the pulley Remove the bearing retaining screws The retainer And the seal ring Replace the bearing and its elements Screw the assembly back on Fit the pulley And the drive belt back on Replace the side panel That’s how your replace the drum bearings on your washing machine! See you soon at Spareka!

Leave a Reply

Your email address will not be published. Required fields are marked *