Shining Up Dirt Bike Parts The Easy Way!
Shining Up Dirt Bike Parts The Easy Way!


welcome back everyone how are you guys
doing so I haven’t done much on the cr250 project for a few weeks now and I
was really starting to miss it I was on vacation in Japan for a few weeks I had
a really good time but now I’m back obviously and it is time to get busting
on this project again so what I’ve got going on today is I’ll be cleaning up
some aluminum parts on this bench grinder back here now the grinder has a
scotch-brite wheel mounted on it and the scotch-brite wheel works amazing for
brightening up aluminum before I get started on today’s video though I need
to pick a winner for the giveaway on the sprocket a few weeks back so let’s get
that taken care of right now all right here’s that sprocket I was
referring to so I had posted up this picture on Instagram and to enter the
giveaway all you had to do was post the comment on that picture
it’s going to go through and load up all the comments and just pick a random one
I’ve got all the comments loaded up now I’m just gonna scroll up and down the
page a few times and whatever comment the mouse lands on you are the winner
give this a few more Scrolls and let it drop all right here we go right there we
have Nick up degraph 43 hey you are the winner I’ll shoot you a DM and get your
shipping address this is what I’ve got going on a bunch of aluminum pieces and
over here on the bench grinder I’ve got the same scotch brite wheel that I’ve
shown in a few of my previous videos I’m gonna fire this thing up and see what we
can do I’ll be starting with this fall will cover here it is looking pretty
worn out but the scotch-brite wheel should freshen it right up so you’ll want to work in the same
direction on the cover that way you end up with a consistent finish to remove
some of the scratches just apply more pressure to the wheel as you’re buffing
this sort of move most of the surface scratches anything deeper like a scar
you’re gonna need something more aggressive for that I am really happy
with how this thing turned out still a few small scratches left in it but this
thing is gonna look awesome when mounted on the bike my goal here is not to have
a polished finish I just want a nice clean finish that’s easy to keep up on
after all it is a dirt bike and I will be riding it quite a bit I think it is
time to shine up some more parts here man these parts are looking super good
another useful thing for the scotch-brite wheels is you can use them
to strip off rust and corrosion off of axles now obviously these are plated and
that scotch-brite is gonna strip that plating off but if you keep these axles
greased that should not be an issue I’m actually really surprised how well
that wheel worked on these axles cleaned up the rust and corrosion like you is
nothing for you guys looking to clean up your own bikes you can find these
scotch-brite wheels over on my website it’ll be the first link down in the
description and this is the same wheel I use the clean up frames by hand I posted
a video a few weeks back on how to do that so click over that frame cleaning
video for more info so I will be giving away one of these Scotch right wheels
for one year to try out all you have to do is write down in the comments below
what bike you ride and I’ll go through and pick a random comment and send this
gosh pad over to you what I’d like to figure out in a future video is how to
brighten up parts with tight crevices like this right here so I think using a
little scotch brite wheel on a dremel tool will do the trick
I’d like to brighten up these parts here along with some engine parts such as the
cases cylinder and clutch cover thank you so much for watching guys I am
really excited to get back in the groove and start pumping out a ton of videos
for you all I’ll see you later

26 thoughts on “Shining Up Dirt Bike Parts The Easy Way!”

  1. Tim Nay says:

    What was the size and grit of the scotch brite wheel …. I'm restoring a 2003 Suzuki rm125.

  2. Dirt bike KIdZ America says:

    That sweet

  3. Racers Time says:

    Kx 112

  4. WHY NOT says:

    YAMAHA

  5. lil Nevid says:

    1997 honda rx100

  6. Toneconsultant gmail says:

    Won’t parts start to corrode if you get crazy with that scotch pad? I think you would have to always clean your parts like that if you do it once.

  7. yoroush mustang says:

    95 Yamaha yzf600r

  8. KrispyKream* says:

    I ride a rmz 250 04

  9. John Barbee says:

    just did the wheel bearings on the front and back of my 2004 RM250 had no idea i could have cleaned the axles up this way

  10. anfas Mohamed says:

    update suzuki djebel 200 information

  11. Frank Bougher says:

    2001 yz426f

  12. Clouder says:

    Can this work on magnesium ignition and clutch covers?

  13. Andreas L says:

    Ktm 85 XS 2014

  14. Stuart James ireland says:

    Husky WR360 02 model

  15. Robert Fischer says:

    2012 KTM 85 sx

  16. El Sermon Del Monte says:

    2002 CR250

  17. Max Mcclellan says:

    KTM 250sx

  18. Will Black says:

    I'd love to see the parts you've added to your bench grinder. I have not seen that arbor setup as it looks both solid and easy to change out.

  19. TJ's films says:

    For some steel parts you can put a clear coat (automotive) and it will not rust

  20. Noah Gabreski says:

    Can you put a scotch brite wheel on an angle grinder?

  21. Down South squonks! says:

    Cameron stupid question but how you keep your scotch brite pad from just spinning freely on your grinder? I can't for the life of me get it where it's tight on the shaft. When i apply pressure it just stops spinning! Thank you bro.

  22. alfie bourn says:

    Rm 85 to clean my exhaust

  23. Bluecollar Mx says:

    I’m wondering what you used to clamp the scotch pad what are those metal pieces from?

  24. Douglas Cary says:

    Watch your video a couple of times. I have a 1973 Honda XL175 I'm trying to "semi restore". the more I look at it the more I end up doing… Just ordered the scotch brite wheel Looking forward to using it!!!!

  25. evan lenzen says:

    DT 175 it's to late I know

  26. Nick Gilstrap says:

    I ride a crf250x

Leave a Reply

Your email address will not be published. Required fields are marked *