Tag: bike

My CR250 Is In A Thousand Pieces!
My CR250 Is In A Thousand Pieces!

I have always wondered what it would look like if I laid out a completer bike in parts on the floor the bike I’m working on right now is an O 3 CR 250 and […] Read More

How To Service A Free Hub Body | Mountain Bike Maintenance
How To Service A Free Hub Body | Mountain Bike Maintenance

– The freehub body, often called the cassette body, is this central part of the hub that the cassette sits on top of. Now it’s primary job is to allow the drive train to work, […] Read More

Replace A Freehub Body On A Bike Wheel
Replace A Freehub Body On A Bike Wheel

Select the gear that uses the least amount of chain, the fastest at the back, the slowest at the front. Open the brake. Rotate the handle on the quick release skewer through 180 degrees from […] Read More

How to Remove and Install a Crank (Square Nut Spindle)

Hello and welcome to another video What I am going to do is show you how to remove a crank set from a square nut spindle Step 1 first remove the dust caps from the […] Read More

Service A Bike Wheel’s Cup And Cone Front Hub
Service A Bike Wheel’s Cup And Cone Front Hub

Take the wheel off the bike to acces the front hub. Hold the cone on one side still with a cone-spanner and loosen the lock-nut. Unscrew and take off the lock-nut, washer and cone. Separate […] Read More

How To Check Over Your MTB Wheels | Mountain Bike Maintenance
How To Check Over Your MTB Wheels | Mountain Bike Maintenance

– Wheels are part of the bike that do take quite a lot of abuse when riding so they should be checked regularly. This is how to do that. So when checking my wheels, the […] Read More

How To Service Cartridge Bearings On Your Road Bike
How To Service Cartridge Bearings On Your Road Bike

– So the bearings on your bike take a lot of abuse. Whether or not you’re dropping a wattage bazooka, riding through bad weather, or just simply racking up the miles, or maybe it’s all […] Read More

How To Remove & Fit A Press Fit Bottom Bracket On A Road Bike
How To Remove & Fit A Press Fit Bottom Bracket On A Road Bike

– Love ’em or hate ’em press-fit bottom brackets are now really common. And let’s face it whilst they do get a bad rap the vast majority of us don’t have a problems with them […] Read More

Mountain Biking Maintenance and Repair : External Ball Bearing & Mountain Biking Tips
Mountain Biking Maintenance and Repair : External Ball Bearing & Mountain Biking Tips

So when we are working with our external bottom bracket systems and our two-piece cranks and all that, we need to remember that there are differences between different manufacturer’s methods of bearing pre-load and crank […] Read More

Remove A Bike’s Square Tapered Crank
Remove A Bike’s Square Tapered Crank

Depending on the fitting of the square tapered crank bolt or nut, use either a socket or hex key to unscrew it. Make sure you remove any washer that’s under the head of the bolt. […] Read More