![How to replace front wheel bearing on NISSAN MICRA 2 Hatchback [TUTORIAL AUTODOC]](https://bogorsehat.com/wp-content/uploads/2019/08/1811/how-to-replace-front-wheel-bearing-on-nissan-micra-2-hatchback-tutorial-autodoc.jpg)
Use a 12-point socket ı32. Loosen and remove the hub nut. Use a drive socket No.17. Use a ratchet wrench. Unscrew the brake caliper fastening Use a drive socket No.17. Use a ratchet wrench. Unscrew […] Read More
Tag: hub bearing
![How to replace rear wheel bearing / rear hub bearing on VW CADDY 3 (2KB) [TUTORIAL AUTODOC]](https://bogorsehat.com/wp-content/uploads/2019/08/1615/how-to-replace-rear-wheel-bearing-rear-hub-bearing-on-vw-caddy-3-2kb-tutorial-autodoc.jpg)
1. Unscrew the wheel bolts. Use wheel impact socket #17. 2. Raise the rear of the car and secure on supports. AUTODOC recommends: To avoid injury, hold up the wheel when unscrewing the bolts. 3. […] Read More
Use a socket №18 Use a torx №T30 Use a socket №30 Use an open-end wrench №17 Use a socket №19 Use a special puller to take the tie rod end out Use a socket […] Read More
Use a torx №М14 Use a torx №Т30 Remove the hub bearing cap Use a torx №М18 Treat the brake disc seat with a special copper grease
![How to replace rear wheel bearing MERCEDES-BENZ B W245 [TUTORIAL AUTODOC]](https://bogorsehat.com/wp-content/uploads/2019/08/1359/how-to-replace-rear-wheel-bearing-mercedes-benz-b-w245-tutorial-autodoc.jpg)
Use a combination spanner №16 Use a torx №T30 Use a socket №E14 Lubricate the brake disc seat with copper spray
![How to replace front wheel bearing / front hub bearing on VW GOLF 6 (5K1) [TUTORIAL AUTODOC]](https://bogorsehat.com/wp-content/uploads/2019/08/1331/how-to-replace-front-wheel-bearing-front-hub-bearing-on-vw-golf-6-5k1-tutorial-autodoc.jpg)
Required tools: Wire brush WD-40 spray Copper grease Drive socket # 15 Drive socket # 21 12-point socket # 24 XZN socket bit # 12 Torx bit T30 Wheel impact socket #17 Ratchet wrench Torque […] Read More
![How to replace rear wheel bearing on SUZUKI SWIFT 3 [TUTORIAL AUTODOC]](https://bogorsehat.com/wp-content/uploads/2019/08/1270/how-to-replace-rear-wheel-bearing-on-suzuki-swift-3-tutorial-autodoc-220x155.jpg)
Raise the rear of the car and secure on supports. Remove the hub bearing protection cap. Use a hammer. Use a flat chisel. Use a drive socket No.30. Loosen and remove the hub nut. Remove […] Read More
Use a socket №12 Remove the hub bearing cap Use a socket №32 Treat the brake drum seat with a copper grease
Use a socket №17 Use a socket №24 Use a combination spanner №18 Use a socket №13 Use a socket №16 Use a socket №17 and a combination spanner №17 Using hydraulic press, press off […] Read More
Use a socket №30 Use a socket №17 Using sidecutting pliers remove the cotter pin Use a combination spanner №17 Use a special puller to take the tie rod end out Use an open-end wrench […] Read More