Tag: nut

Picking Up Acorns with Baganut Nut Roller- OLD STYLE
Picking Up Acorns with Baganut Nut Roller- OLD STYLE

FOR UPDATED VIDEO CLICK ABOVE

Porter Cable Drywall Sander Repair – Replacing the Flange Nut (Porter Cable Part # 877757)
Porter Cable Drywall Sander Repair – Replacing the Flange Nut (Porter Cable Part # 877757)

“The sanding pads are secured to your drywall sander with a special flange nut. The plastic nut sits very low, so it won’t contact the wall while you sand. Over time, the plastic threads will […] Read More

DeWALT Grinder Repair – Replacing the Outer Flange (DeWALT Part # 611672-00)
DeWALT Grinder Repair – Replacing the Outer Flange (DeWALT Part # 611672-00)

The outer flange is one of two flanges that secure the grinding wheels to your grinder. It has a five-eighths-inch threaded hole, so it can be secured to the grinder’s spindle. One side has a […] Read More

Remove Stuck Skateboard Truck Hardware Bolts
Remove Stuck Skateboard Truck Hardware Bolts

Today I’ve got some new trucks and wheels that I want to put on this board but when I was taking the hardware off of this truck here one of the bolts stripped and now […] Read More

DIY Honda stiff hard power steering adjustment loose or tight rack and pinion repair fix
DIY Honda stiff hard power steering adjustment loose or tight rack and pinion repair fix

Do at your own risk and use all safety steps! Common Honda steering issue is a hard or stiff steering or sometimes loose (steering play). First make sure Tie rod ends, ball joints, control arms […] Read More

BMW E91 Heckscheibenwischer Lager tauschen
BMW E91 Heckscheibenwischer Lager tauschen

A common problem for the E91 is a rear wiper that moves very slowly or not at all. The reason for this is a defect bearing in most cases. It’s not exactly cheap, but it […] Read More

Grinder Repair – Replacing the Flange (DeWALT Part # 633257-00SV)
Grinder Repair – Replacing the Flange (DeWALT Part # 633257-00SV)

The flange works with the nut to secure the grinding disk to your grinder. It has a 5/8 inch non-threaded hole, a recess milled in it that engages with the spindle and a 7/8 inch […] Read More

Grinder Repair – Replacing the Flange Nut (DeWALT Part # 636226-00)
Grinder Repair – Replacing the Flange Nut (DeWALT Part # 636226-00)

The lock nut is one of two flanges that secure the grinding wheels to your grinder. It has a 5/8-inch threaded hole so it could be secured to the grinder’s spindle. One side has a […] Read More

Fix Truck Axle Threads On Skateboard & Longboard
Fix Truck Axle Threads On Skateboard & Longboard
Fix Truck Axle Threads On Skateboard & Longboard