Tag: using

Lazze Metal Shaping: Keeping Flat Materials In The Bead Roller PART 1
Lazze Metal Shaping: Keeping Flat Materials In The Bead Roller PART 1

Yeah I’m back in the bead roller again and this is another tips and tricks in bead roller. And it took me a while to figure this out but I think it’s a good idea […] Read More

Mod-08 Lec-34 Design of embankments on soft soil using geosynthetics
Mod-08 Lec-34 Design of embankments on soft soil using geosynthetics

Today, we will be talking about Design of Embankments on Soft Soil using Geosynthetics. This is the thirty-fourth lecture in this series. We will have some introduction, what are the modes of failure of the […] Read More

DIY FIDGET SPINNER WITHOUT A BEARING | How To Make A Fidget Spinner Using Duct Tape
DIY FIDGET SPINNER WITHOUT A BEARING | How To Make A Fidget Spinner Using Duct Tape

How to Make A Fidget Spinner Without A Bearing Using Duct Tape. VEGETABLE OIL

How to replace engine oil and oil filter MERCEDES-BENZ E W211 TUTORIAL  AUTODOC
How to replace engine oil and oil filter MERCEDES-BENZ E W211 TUTORIAL AUTODOC

Use a torx №T30 Using a special wrench, unscrew the oil filter housing cover Use a socket №13

Replacing Wheel Bearings on a Mazda 3
Replacing Wheel Bearings on a Mazda 3

Hello, MegaSafetyFirst here. I am going to replace the rear Wheel Bearing Assembly on a Mazda 3. The tools I am going to use is a Torx T-50, a 5mm and 14mm socket and a […] Read More

How to replace front wheel bearing MAZDA MX-5 TUTORIAL | AUTODOC
How to replace front wheel bearing MAZDA MX-5 TUTORIAL | AUTODOC

Use a socket № 14 Using a simple screwdriver and a hammer remove the wheel bearing cap Use a socket № 27