TruRyde Trailer Bearings and Races Kit Installation – etrailer.com


Today on our pop up camper, we’re going
to be installing the TruRyde Bearing Kit part number BK1-150. We’ll first begin by removing the four
lug nuts that hold the wheel in place. We’ll need to first remove the dust cover. To do this we’ll tap a screwdriver in
between the dust cover and the hub. With our dust cap removed, we’ll go ahead
and wipe off a little bit of the grease here. We’ll need to
take the retaining piece right here, it’s go tthe yellow on it.

Leave a Reply

Your email address will not be published. Required fields are marked *